A real world comparison between Mono, Poly, PERC and Dual PV Modules.
* This is a field test and the results are specific for this installation on this location please research which is the best solution for your own situation as the results can be different based on environmental influences.
Total solar yield as of 27/03/2023 when the results were reset:
Mono: 9158 kWh
Split-cell: 9511 kWh
Poly: 9113 kWh
Perc: 9471 kWh
Perc-east: 1970 kWh
Perc-west: 1730 kWh
The
EV Charging Station NS has three-phase and single-phase capabilities. It
delivers a maximum of 22kW AC in three-phase or 7.3kW in single-phase mode.
The device is technically
identical to the EV Charging Station, but with a new, modern design available
in 3 colours and without the built-in LCD screen. Initial setup, configuration
and monitoring is done from VictronConnect via Bluetooth and/or the integrated
web interface via a WiFi Access Point or a WiFi LAN.
The charger can be fully integrated with and remotely controlled via a
Victron Energy GX Device and VRM.
Not only does this EV Charging Station NS fully integrate with a Victron Energy GX device and VRM, if you have solar (within the Victron ecosystem), it can also be set up to allow excess energy from the sun to directly charge your vehicle. Manual and scheduled modes offer even more flexibility to respond to the needs of the EV depending on the system.
It has a fully programmable RGB light ring
around the charging port that displays different light effects depending on the
current status (disconnected, charging, charged, etc.) to quickly determine the
device status.